2000W Handheld Laser Welder to Weld Iron, Stainless Steel
Features
The reason why 2000W handheld laser welding can better guarantee the welding effect are:
1. It has a high aspect ratio, small weld width, small heat affected zone, small deformation, and fast welding speed.
2. Welding seam is smooth and beautiful, no need to deal with after welding or only simple processing procedure.
3. Welding seam is of high quality and no porosity, which can reduce and optimize the base metal impurities, the structure can be refined after
welding, and the weld seam strength is at least equal to or exceeds the base metal
Technical Specification
| Equipment Name | Handheld Fiber Laser Welding Machine |
| Laser Power | 2000W |
| Laser Wavelength | 1064nm |
| Fiber Cable Length | Standard: 10 Meters |
| Working Mode | Continuous / Modulation |
| Welding Speed Range | 0-120mm/s |
| Cooling Machine | Industrail Constant - Temperature Water Tank |
| Working Environment Temperature Range | 15℃ - 35℃ |
| Working Environment Humidity Range | ＜70% No Condensation |
| Recommend Welding Thickness | 0.5mm - 3mm |
| Welding Gap Requirement | ≤0.5mm |
| Working Voltage | 110V / 220V |
Traditional Welding VS Laser Welding
Traditional welding methods have the following disadvantages:
- The traditional welding process has process bottlenecks and cannot efficiently realize the precision welding of small devices.
- The traditional welding process is contact welding, there is a hidden danger of damage to the wire and transmission performance, and this processing method is easy to interfere and affect the welding process.
- The traditional welding process is a crimping soldering method, which has stress contact. In some high-end transmission fields, there are transmission risks.
- When there are heat-sensitive components, it is not appropriate to use traditional full-page annealing welding methods, etc.
Compared with traditional soldering methods, the advantages of laser welding are:
- The laser processing precision is high, the light spot can reach the micron level, the processing is easy to program control, and the precision is much higher than the traditional technology.
- Non-contact welding, there is no stress caused by contact welding.
- A small laser beam replaces the soldering iron tip, which is also easy to process when there are other interference objects on the surface of the processed part.
- Local heating, small heat affected zone.
- No electrostatic threat.
- Laser is the cleanest processing method, no consumables, simple maintenance and convenient operation.
